Our friends over at Boardcave have shared their thoughts on helping every surfer out there get the right fins for your stick. The fins you put in your favorite surfboard can play a huge role in your performance out in the lineup, and ultimately how much fun you get out of your session.
With so many different boards and different conditions, it’s important to think about different fins and fin setups that work the way the shaper intended the board to be ridden.
The best thing is, just like surfboards, fin design, templates and experimentation is almost endless. Before you dive head first into testing, it’s great to know a little bit about how each characteristic can impact your surfing performance. Let’s start with the basics.
The size of your fins is going to impact your performance. A larger fin generally will have more hold and also provide plenty of control in bigger surf. A smaller fin, on the other hand, is going to be more forgiving and loose, but you’re going to sacrifice a lot of drive and control in bigger surf.
The part of the fin that is actually attached to the board is called the base of the fin or the fin base. A longer (or wider) fin base is going to help with your drive. This translates into drawn out turns. Compare this with a narrow, or short fin base that is going to let you turn a little easier and sharper but without as much of that drive.
The fin depth or fin height refers to just how far the fin extends away for the bottom of the board. A deeper fin in the water is going to have more hold and stability than a shallow fin. The more shallow a fin, you are going to get more release when you throw that tail around through turns.
When you’re looking at the arc of the fin and how far back it tilts or sweeps, you’re looking at the fin rake. The larger the degree of rake, the more drawn out your turns will be.
This is great for those bigger days with a nice long wall to work with. Less fin rake and a more upright fin template, means that you’re going to get some more pivot out of them – great on junkier, weaker days.
The fin foil is an aerodynamic shape from front to back of the fin. Much like the wings on a plane, this foil generates lift under the board. A fin is usually going to get thicker through the center of the fin and taper smaller out towards the edges. There are a couple of types of fin foils with many variations on each.
Side fins (on twins, thrusters and quads) are generally flat, sometimes curved inward on the inside and with a foil on the outside.
Center fins will mostly have equal foil or double foil on each side. These center fins are found on the back of thrusters, single fins and sometimes the rear fins on quads. Double foil can also be found on some more traditional twin fin fish models.
Fin Cant is the degree of outward angle a fin has in relation to the bottom of your surfboard. If a fin has zero cant it’s position straight up and down at a right angle to your board. This is going to be fast in a straight line, but it won’t give you as much responsiveness through turns.
If the cant of your fin is larger, your going to gain a little more of that responsiveness through your turns. It means you can maintain some more drive when your board is tilted on the rail.
The toe of your fins set up is relating to the angle that your fins are pointing at towards the stringer. This occurs a lot in side fins with the front of the fins pointing towards the center of your board. This can help create pressure on the outside foil of the fin. This in turn, allows you to again have a little more responsiveness on your board.
Now that you’ve got the basics and all the lingo for fins, you need to understand a little more complicated aspects about how fin shape can contribute to the overall surfing performance.
Your fin’s shape impacts directly on how your surfboard is going to perform. One way to comprehend this is to use a Single Fin for our descriptions.
When you get down to it, thrusters, quads, side fins are more or less variations of these characteristics just in a smaller version. Flex is one of these characteristics that can directly relate to fin performance.
Flex will contribute to your projection out of turns, which in turn will produce your speed and effect control. More details on flex will follow, but for the purpose of this article, lets look at how flex and shape of fins go hand in hand. Lets go back to our longboard and check out how it’s going to perform using 4 different fin shapes.
The Flex Fin, the Rake Fin, the Pivot Fin and the D Fin.
The Flex Fin (with maximum flex) is a really versatile fin that can be used in just about anything from shorter stubbies to 10 foot nose riders. These flex fins are going to feature a wider base that really tapers down into a narrow tip and doesn’t offer too much drag. When coming off a bottom turn, your flex fin will give you a ton of projection.
This reflects what we mentioned earlier, where the more rake you have in your fin, the more you can draw out your turns compared to a rigid upright fin template for more pivot in tighter turns.
The Rake Fin (with medium flex) is the next most flexible and sits between the flex fin and the pivot fin along the spectrum. With a wide base like before but with a little more width in the tip of the fin you can see a fairly vertical base that sweeps back towards the end. This combines nicely the projection and maneuverability of the flex fin with some of the hold you get from a Pivot Fin.
The Pivot Fin (with very little flex) is your standard go-to fin-shape for nose riding. You can recognize this fin by it’s full, vertical outline with a wide base. It’s designed to slow you down a little and help keeps the tail further in the water while you’re up on the nose. You can also still step on the tail and pivot (swing) the board around in a relatively tight radius.
The D Fin (with no flex) isn’t going to be the most forgiving fin or the most versatile to surf. Usually you see these on a more classic, heavier log. A little harder to turn and not as stable when you’re on the nose, this fin is more for getting maximum trim straight down the line.
With a super wide base combined with a super wide tip, these fins get their name from generally appearing in the shape of a D. Sometimes you can find them with a straighter, more vertical forward edge with a curved side aft, and sometimes they’re found with curved edge forward and vertical edge aft.
You would usually place these fins as far back of your board as possible for maximum down the line trim.
So now you know the basics of Surfboard Fins, and you can start experimenting with different designs and testing out what works best for you.